Memmert CELSIUS 10.0 - Manual (Page 44)

44
CELSIUS 10.0
Only existing folders or network drives may be selected. No new folders may be created.
Backup copies in the backup folder can be read, but not deleted or overwritten. If backup
files are to be deleted, the "Read only" property of the directory must be changed.
A copy of the following file types is saved automatically in the backup folder:
► *.cel: CELSIUS tempering profiles
► *. pro: CELSIUS protocol files
► *. bin: Protocol files of the internal controller ring protocol memory
For each day when data is saved, a separate folder with
the appropriate date is created. All the backup copies for
one day are located in this folder. The current time is
added to the file name each time. In this way, it is
possible to save several backup copies under the same
file name on the same day.
Example:
The tempering profile file "Test 08-2010.cel" is
backed up on 21 February 2010 at 15:22:35 in
the folder
D:\CELSIUS Backup\2010-02-21 as
"Test 08-2010-15-22-35.cel":
7.4 Saving Settings
„ Settings→ Save Settings" saves the current
assignment of interfaces to ovens and their con-
figurations. All other basic settings of this menu
are saved automatically when the programme
ends.
If you enable " Save Settings on Exit" and close CELSIUS via "File"→ "Exit", the assignment of the
interfaces to the ovens and their configurations are saved automatically when the programme
ends. The next time the programme starts, CELSIUS tries to log on the ovens exactly as before.
If an oven that was previously logged on online is no longer available, it is not logged on
again.
7.5 Logging off ovens
With " Settings→Log-off Device" you can log off the oven that is shown in the current window.
If the oven is still active or if the tempering profile has not yet been saved, you are prompted
for confirmation. "Log-off all Devices" - logs off all devices.
File Edit View Favorites Extras
Search Back
File Edit View Favorites Extras
Search Back