Memmert CELSIUS 10.0 - Manual (Page 27)

27
CELSIUS 10.0
6. Working with CELSIUS
6.1 Tempering profiles
6.1.1 Creating a new tempering profile
A new, empty tempering profile can be created in three ways:
► in the graphics window that is automatically started when a new oven has been logged
on (see above)
► via "File"→"New Profile"
► by clicking on in the toolbar
6.1.2 Graphical and tabular view
Tempering profiles can be created and edited in graphical (see page 29 ) and tabular form (see
page 34 ).
You can switch between the two views at at any time:
► with the icons ( graphical view) and ( tabular view) in the toolbar
► via "View"→"Graphics" or "View"→"Table"
Example of graphical and tabular presentation of the same tempering profile:
Time
hh:mm
Period
hh:mm
Vacuum
mBar
Type
What setting options are available depends on what oven type is used for a tempering profile.
The setting options for individual oven types are listed from page 7 .
With "Edit"→"Undo" or , the last performed entry / change can be revoked.