Memmert CELSIUS 10.0 - Manual (Page 37)

37
CELSIUS 10.0
► To Internal MemoryCard ( or "File"→"Save Tempering
Profile"→"To Internal MemoryCard "). With this command,
the tempering profile on the MEMoryCard can be stored
in the controller of the oven. In this case, the
MEMoryCard must be compatible with the oven model.
You may enter a name for the tempering profile saved on
the card (max. 8 characters, no spaces) or use the name
suggested.
If you enable "Write Protection", you ensure that the tempering profile on the MEMoryCard
cannot be altered by the controller of the oven. This write protection has no effect on
CELSIUS writing data to the MEMoryCard. The default setting for write protection is ON.
Only one tempering profile can be written on a MEMoryCard XL. The MEMoryCard XL can
be overwritten at any time, however.
► To External MemoryCard ("File"→" Save Tempering Profile"→"To External MemoryCard ( USB/
RS 232)". This allows you to save a tempering profile of up to 40 ramps on a card in a con-
nected and logged on card reader (see page 45 ).
With "File"→"Load Tempering Profile"→"From Internal MemoryCard "/"... external" you can open
tempering profiles stored internally or externally on the MEMoryCard.
6.1.8 Printing a tempering profile
In order to print a tempering profile,
click on
or select "File→ Print
Profile".
The Windows print dialog appears.
The default setting is the standard
printer set for Windows. You may
select a different printer that is con-
nected.
The print command prints out the
content of the active window. The
time range displayed on the screen is
printed, with or without GLP header
data.
If the graphics window is active on
the screen, the current tempering
profile and the protocol are printed
in the graphic mode. If the tempering profile is displayed on screen in tabular form, it will be
printed out in tabular form.
Printing is only possible if the tempering profile is not currently being run in the oven.
Multipage Printout
For the print option "File→ Multipage Printout", the printout is done as in " Print Profile", but the
entire tempering profile is printed out – on several pages, if necessary. The time axis is selected
according to the current screen display.
Print
Printer
Location
Comment
Print Range
All
Pages
Selection
Cancel