Memmert CELSIUS 10.0 User Manual
Page 28
28
CELSIUS 10.0
6.1.3 Device status line
The device status line is visible at the top of the graphical and tabular views while a tempering
profile is being created or run. It shows the following information:
Controller active
COM3 IST: 24.1 °C 40.1 °C
0:02h
1
2
3
4
5
1
Controller status, e.g.:
►
Edit Profile
The tempering profile can currently be edited.
►
starts at ...:
Time at which the controller starts
►
Controller active: The controller is currently controlled by the PC. At the
temperature curve, nothing can be changed.
►
Controller passive: The programme sequence was interrupted by a pause in the Run
menu.
►
STOP:
The programme, and thus the controller, was stopped.
To edit the tempering profile, the menu item "Wrap-Up
Profile" in the "Edit" menu must be selected.
►
ERROR
The controller has reported an error state.
The corresponding error text is displayed.
2
COM interface of oven or "offline"
3 Actual temperature value
4 Physical properties of the oven at the mouse position while a tempering profile is being
run (e. g. temperature, humidity, vacuum) or the temperature at the mouse cursor position
while the temperature profile is being entered
5 Current runtime or the time coordinates at the mouse cursor position while the tempera-
ture profile is being entered
The device status line can be switched on and off in the Settings menu.