Memmert CELSIUS 10.0 - Manual (Page 21)

21
CELSIUS 10.0
4. Connect ovens and external devices
Always install the software and necessary drivers (e.g. USB) first before connecting an oven
to the computer.
When connecting an oven, read the information and notes concerning this in the
oven's user manual.
To control an oven from the PC and – if it is equipped accordingly – to be able to access the
integrated card reader, the oven must be connected to the PC and switched on. It must be in
the "I" operating mode. In addition, the address with which you want to access the oven from
the CELSIUS software must be set (see also page 25 and the user manual for the oven).
Connecting wires to the ovens with the RS-232 or USB interface (alternatively via RS-485 or
Ethernet, for the P class only) is described in the user manual.
The correct installation and configuration of the PC interfaces is in general dependent on the
type and manufacturer, which is why we refer you to the appropriate system documentation.
4.1 Connect ovens with a USB interface to a computer with an
USB interface
For every oven with a USB interface that is to be connected to the computer, one USB inter-
face must be available on the computer.
Connect the USB connections of the oven and computer with a standard USB cable (maxi-
mum 5 m) and log on the oven in CELSIUS as described on page 25 .
”P
”P