Lenze EMF2181IB - Manual (Page 14)

Product description
Product features
3
l
14 EDSMF2181IB EN 3.0
3.3 Product features
The communication module is used for setting parameters during remote maintenance or
for programming and commissioning the applicable Lenze devices.
The ModemCAN 2181 communication module makes it possible to directly couple a CAN
bus to an analog telephone line. It is equipped with an internal analog modem which is
approved for all internationally relevant countries and telephone standards and thus
enables worldwide remote maintenance. If required, an external modem can be
connected if the internal modem is not suitable in the respective country, or if a GSM or
ISDN modem is required.
)
Note!
We continuously strive to ensure the highest level of compatibility between
the ModemCAN 2181 and other modems. However, full compatibility cannot
be reached because of the great variety of modems available on the market. If
communication with the internal modem cannot be established, a suitable
external modem has to be used.
Application range
The communication module can be used with the following Lenze devices:
ƒ Servo Drives 9400
ƒ Inverter Drives 8400
ƒ 9300 servo inverter
ƒ 9300 vector
ƒ 9300 Servo PLC
ƒ ECS servo system
ƒ 8200 motec motor inverter
ƒ 8200 vector frequency inverter
ƒ 82XX frequency inverter
ƒ Drive PLC
ƒ Terminal extension 9374
ƒ Control / display unit (EPM−HXXX)
ƒ I/O system IP20 (EPM−TXXX)
The internal modem supports a series of international specifications and standards.
If the internal modem cannot be used, it is possible to connect an external modem using
the RS232 interface.