C13901 | firmware compilation date, C13902 | firmware version, C13910 | i&m1 system designation – Lenze E84DGFCR User Manual
Page 83: C13911 | i&m1 installation site, C13912 | i&m2 installation date, C13913 | i&m3 additional information, C13910, C13911, C13912, C13913

EDS84DMOTPNET EN 2.0 - 11/2011
L
83
Communication manual 8400 motec PROFINET
Parameter reference
Parameters relevant for PROFINET communication
C13901
C13902
C13910
C13911
C13912
C13913
Parameter | Name:
C13901 | Firmware compilation date
Data type: VISIBLE_STRING
Index: 10674
d
= 29B2
h
The code contains a string with a length of 20 characters. The software creation date ("MMM DD YYYY") and time
("hh:mm:ss") are displayed (e.g. "Mar 21 2005 12:31:21").
;
Read access Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C13902 | Firmware version
Data type: VISIBLE_STRING
Index: 10673
d
= 29B1
h
The code contains a string with a length of 11 characters. The identification code is displayed (e.g. "01.00.00.00").
;
Read access Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C13910 | I&M1 System designation
Data type: VISIBLE_STRING
Index: 10665
d
= 29A9
h
Input/output of the I&M1 plant identification code
• The Lenze setting shows an empty string.
;
Read access ; Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C13911 | I&M1 Installation site
Data type: VISIBLE_STRING
Index: 10664
d
= 29A8
h
Input/output of the I&M1 location identification code
• The Lenze setting shows an empty string.
;
Read access ; Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C13912 | I&M2 Installation date
Data type: VISIBLE_STRING
Index: 10663
d
= 29A7
h
Input/output of the I&M2 date of installation
• The Lenze setting shows an empty string.
;
Read access ; Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C13913 | I&M3 additional information
Data type: VISIBLE_STRING
Index: 10662
d
= 29A6
h
Input/output if the I&M3 additional information
• The Lenze setting shows an empty string.
Subcodes
Lenze setting
Info
C13913/1
I&M3 additional information
C13913/2
I&M3 additional information
;
Read access ; Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT