2 features and variants, Features and variants, Communication manual 8400 motec profinet – Lenze E84DGFCR User Manual
Page 14

Communication manual 8400 motec PROFINET
Product description
Features and variants
14
L
EDS84DMOTPNET EN 2.0 - 11/2011
3.2
Features and variants
The PROFINET Communication Unit is available in the following versions:
The PROFINET Communication Unit is ...
– mounted to the Wiring Unit (E84DGVNxx);
– supplied internally via the Drive Unit (E84DGDVxxxxxxxx) or externally via a
separate voltage source.
The I/O connections can be brought into the device via M12 connectors or cable glands.
Devices without an integrated safety system (safety option) have no analog input and
no relay output.
The integrated safety system of the E84DGFCRxJx Communication Units can be used
on machines for the protection of persons.
Support of the I&M0...4 functionality for the identification of the standard device
Automatic detection of the baud rate 100 Mbps
A line topology is enabled by the integrated 2-port switch.
Support of the LLDP protocol for the topology recognition
Support of the SNMP protocol for diagnostic purposes
Exchange of up to 8 process data words per direction
Communication with the Lenze »Engineer« (access to all Lenze parameters) is executed
via the diagnostic interface of the Drive Unit.
An online connection via PROFINET is possible with the Lenze »Engineer«.
Product series
Type designation
Features
Enclosure IP
65
PR
OFIN
ET
M12
I/
O:
T
er
m
in
al
I/
O:
M1
2
Sa
fe
ty
Inverter Drives 8400 motec
PROFINET Communication Unit
E84DGFCRANP
z
z
z
E84DGFCR9NP
z
z
z
E84DGFCRAJP
z
z
z
z
E84DGFCR9JP
z
z
z
z
"Inverter Drives 8400 motec" hardware manual
Here you will find detailed information on the integrated safety system (safety
option).
Software manual / »Engineer« online help for the "Inverter Drive 8400 motec"
Here you will find detailed information on how to configure the safety system
(safety option).