Communication manual 8400 motec profinet – Lenze E84DGFCR User Manual

Page 36

Communication manual 8400 motec PROFINET

Commissioning

Establishing an online connection via PROFINET with the Lenze »Engineer«

EDS84DMOTPNET EN 2.0 - 11/2011

In the »Engineer«, by means of the menu command Online  Set communication path and

go online, you can select the PROFINET communication path. The PROFINET nodes

configured previously are shown in the Communication path dialog window:

If the device access path is not configured correcty, here the

IP address of the controller

selected in the display field can be entered manually.

Via

Search/Enter you can establish a connection to devices which have not appeared

in the display field. Corresponding settings for this can be made in the dialog window Enter

IP address, which is shown:

Here you can enter an

IP address manually or execute the following actions using the

buttons:

 Execute the console command

Ping.

 Assign the IP address via the

Configurator.

 Select the device access path to the desired controller by clicking

Find.

After having established the online connection, you can continue work with the

»Engineer« as usual.