C13894 | baud rate, C13900 | firmware product type, C13901 | firmware compilation date – Lenze E84AYCIB User Manual
Page 68: C13902 | firmware version, C13894, The baud rate can be set via switch 8 or code, For t, E84aycib communication manual (interbus)
E84AYCIB communication manual (INTERBUS)
Parameter reference
Parameters of the communication module
68
L
EDS84AYCIB EN 4.0 - 11/2010
C13894
C13900
C13901
C13902
Parameter | Name:
C13894 | Baud rate
Data type: UNSIGNED_8
Index: 10681
d
= 29B9
h
Setting of the baud rate
The setting is activated ...
• if all DIP switches (S205) are in the "OFF" position;
• after executing the "11: Save start parameters" device command via standard device code C00002 and
performing another mains switching of the communication module/drive afterwards.
Selection list
(Lenze setting printed in bold)
0 500 kbps
1 2.00 Mbps
;
Read access ; Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C13900 | Firmware product type
Data type: VISIBLE_STRING
Index: 10675
d
= 29B3
h
Display of the product type (string with a length of 8 bytes)
The following identification code is output: "E94AFYIB".
;
Read access Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C13901 | Firmware compilation date
Data type: VISIBLE_STRING
Index: 10674
d
= 29B2
h
Display of the compilation date of the firmware (string with a length of 20 bytes)
The date ("MMM TT JJJJ") and time ("hh:mm:ss") are output, e.g. "Mar 21 2005 12:31:21".
;
Read access Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C13902 | Firmware version
Data type: VISIBLE_STRING
Index: 10673
d
= 29B1
h
Display of the firmware version (string with a length of 11 bytes)
The identification code is output, e.g. "01.00.00.00".
;
Read access Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT