Lenze E84AYCIB - Manual (Page 35)

EDS84AYCIB EN 4.0 - 11/2010
L
35
E84AYCIB communication manual (INTERBUS)
Commissioning
Possible settings through DIP switch
6.2.1 Setting the number of process data words (PD)
 The number of process data words (PD) can be set via switches 1 ... 4 or code C13893
(for this, see Settings in the »Engineer«
( 38)
).
 0 ... 10 process data words can be used.
 The current setting is displayed in
C13860/2 .

Note!
The data word sum (PD + PCP) must amount to 1 ... 10 words. Impermissible
settings are reported by the LED "BE" (red blinking).
LED status displays
( 54)
The communication module then continues to operate internally with the
following values:
• PD = 2 (words)
• PCP = 1 (word)
DIP switch Number of
PD
Switch Max. number
of PCP
1 2 3 4
0 OFF OFF OFF OFF 4
1 OFF OFF OFF ON
2 OFF OFF ON OFF
3 OFF OFF ON ON
4 OFF ON OFF OFF
5 OFF ON OFF ON
6 OFF ON ON OFF
7 OFF ON ON ON 2
8 ON OFF OFF OFF
9 ON OFF OFF ON 1
10 ON OFF ON OFF 0
12345678
ON OFF