Leica Biosystems SmartTouch - Manual (Page 76)

Leica SmartTouch™ Manual 76
Assigning a Function to the Toggle Button
If you do not need the second level of
rotary actuators, you can assign the
toggle button on the double rotary actuator its
own function. Then, a total of three functions
are available to you:
Rotary actuator 1 + rotary actuator 2 + toggle
button
Assigning the toggle button
1. Touch the "Config." tab.
2. Touch the button for the double rotary
actuator assignment.
3. Touch the symbol of the toggle button to
select it.
4. Touch the command you want to assign to
the toggle button.
If you want to go back to using the toggle
button for switching between the two
command levels, assign the "Toggle" command
to it.