Leica Biosystems SmartTouch - Manual (Page 27)

Leica SmartTouch™ Manual 27
When the Leica SmartTouch™ is reset to
the factory defaults, all values are reset
without exception. However, a stereomicro-
scope with fluorescence equipment configura-
tion will have different factory defaults than a
macroscope.
The label of the button for the factory
defaults depends on the connected
microscope.
When the button for factory defaults is
touched, the Leica SmartTouch™ is reset
immediately without further warning. This
command cannot be undone.
Resetting to Factory Defaults
1. Touch the "Config." tab.
2. Touch the button for the SmartTouch™
settings.
3. Touch the button for the factory defaults.
4. Touch the button for resetting to the factory
defaults.
Resetting to Factory Defaults