JULABO CF41 Cryo-Compact Circulators - Manual (Page 47)

Cryo-Compact Circulators
47
Int. Programmer
>Edit
Delete
Print
Set Clock Edit Compile profiles
Display sections
Important: Also a running profile can be changed.
See „Edit after start“ page 42
Delete Delete sections
Print Print a programmed profile
Set clock Set the real time on the instrument
Example:
>Edit Profile: 1
Step: 6
Setp: 100.00°C
Time [hh:mm] 01:05
Edit
Compile profiles:
A flashing segment indicates that a number needs to be entered.
Under submenu „Edit Profile“ enter a profile number.
Six profiles may be stored (nos. 0 to 5).
Edit Profile: Profile No.1
Then programme the desired values for each section.
Use the keypad to set section number, target temperature and time
period. Set each entry with enter .
Step: Section No. 6
Setpoint: target temperature - 100 °C
Time time period - 1 h:05 minutes
When the program is running, only sections having complete
information for target temperature and time period are considered.
It makes sense, to leave out section numbers in the profile, in order
to use them later for corrections in the profile
Important:
If a time of 00:00 is set for a profile, the profile is continued with the
next section only after the setpoint temperature (±0.2 °C) is
reached.
Example:
Step
(No.) 1 3 5 6 9 11 14
Setpoint (°C) 50 50 100 100 80 80 20
Time (h.m) 00:08 00.02 00:10 01:05 00:10 00:05 00:30