Intelix ASW-WP Installation Manual - Manual (Page 6)

ASW-WP Installation Guide
Rear Panel
EDID Select DIP switches – Alter the EDID that is being presented to the HDMI and PC Video
sources.
Status LEDs – Indicates status of the HDBaseT chip and connection
HDMI (Green) – Indicates whether video is being transmitted
Link (Amber) – Indicates the integrity of the connection between the ASW-WP and the
HDBaseT receiver
Heartbeat (Blue) – Indicates whether the HDBaseT chip is running
Dry contact inputs – Inputs for mechanical switches or relays to provide manual input selection
control
Aux power input – 5vDC 2a input to power the ASW-WP. It is not necessary to connect power
when using a compatible receiver with PoE (Power over Ethernet) such as the DIGI-HD60C-R.
When required, Intelix part # PS-5D-20TL should be used.
EDID Select
DIP Switches
Status LEDs
Twisted
pair output
Dry contact
inputs
Aux power
input
6