INFICON RQCM - Quartz Crystal Microbalance Research System - Manual (Page 100)

RQCM – RESEARCH QUARTZ CRYSTAL MICROBALANCE
REFERENCES 12-2
17 Prime, K. L., Whitesides, G. M., Science, 252 (1991) 1164. Prime, K.L., Whitesides, G.M., J.
“A Model System Using Self-Assembled Monolayers”, Am. Chem. Soc., (1993), v.115, 10714-
10721.
18 Colorado Jr., Ramon, Villazana, Ramon J., and Lee, T. Randall, “Self-Assembled Monolayers
on Gold Generated from Aliphatic Dithiocarboxylic Acids”, Langmuir 14 (1998) 6337-6340.
19 Duan, Lili and Garrett, Simon J., “Self-Assembled Monolayers of 6-Phenyl-n-hexanethiol and
6-(p-Vinylphenyl)-n-hexanethiol on Au(111): An Investigation of Structure, Stability, and
Reactivity”, Langmuir (2001) 17, 2986-2994.
20 P. E. Hockberger et. al., “Cellular engineering: control of cell-substrate interactions” in
Nanofabrication and Biosystems, H. C.Hoch, L.W. Jelinski and H.G. Craighead Eds., Cambridge
University press (1996) 276-299.
21 Buttry, Daniel “Applications of the QCM to Electrochemistry”, in A Series of Advances in
Electroanalytical Chemistry, edited by Allen Bard, Marcel Dekker, (1991), p. 23-33.
22 C. Lu and O. Lewis, “Investigation of film-thickness determination by oscillating quartz
resonators with large mass load”, J. Appl. Phys. 43 (1972) 4385.
23 Martin, Stephen J., Spates, James J., Wesendorf, Kurt O., Thomas Schnneider and Robert J.
Huber, “Resonator /Oscillator Response to Liquid Loading”, Anal Chem 69 (1997) 2050.
24 Muramatsu, H., Tamiya, Eiichi and Karube, Isao, “Computation of Equivalent Circuit
Parameters of Quartz Crystals in Contact with Liquids and Study of Liquid Properties”, Anal.
Chem. 60 (1988) 2142.
25 Geelhood, S.J., Frank, C. W. and Kanazawa, K., “Transient Quartz Crystal Microbalance
Behaviors Compared”, Journal of the Electrochemical Society, 149 (2002) H33-H38.
26 Yang, Mengsu and Thompson, Michael, “Multiple Chemical Information from the Thickness
Shear Mode Acoustic Wave Sensor in the liquid Phase”, Anal. Chem. 65 (1993) 1158.
27 S. J. Martin, R. W. Cernosek and J.J. Spates, “Sensing Liquid Properties with Shear-mode
Resonator Sensors”, in Proceeds from Transducers/Eurosensors IX, Stockholm, Sweden (1995).
28 Kanazawa, K., “Characterization of Operating Behavior of the PLO-10”, A Report Submitted
to Maxtek, Inc. by Process Monitor, April 2000, p. 6.
29 Mark Deakin and Daniel Buttry, “Electrochemical Applications of the Quartz Crystal
Microbalance”, Anal Chem, 61 (20) (1989) 183.
30 Buttry, Daniel and Ward, Michael, “Measurement of Interfacial Processes at electrode surfaces
with the EQCM”, Chem. Rev. 92 (6) (1992) 1355.
31 O. Melroy, K. Kanazawa, J.G. Gordon II and D. Buttry, “Direct Determination of the Mass of
an Underpotentially Deposited Monolayer of Lead on Gold”, Langmuir 2 (1986) 697.
32 Mark R. Deakin and Owen Melroy, “Underpotential Metal Deposition on Au, monitored in situ
with a Quartz Microbalance”, J. Electroanal. Chem. 239 (1988) 321.
33 Masahiro Seo, Masaki Aomi and Kengo Yoshida, “A combined Piezoelectric and EQCM study
of Underpotential Deposition of Silver on Gold Electrodes”, Electrochimica Acta, 39(8/9) (1994)
1039.