INFICON DataFID Portable Flame Ionization Detector for Leak Detection and Repair (LDAR) - Manual (Page 60)

074-578-P1A 60
The up and down arrow soft keys are used to change the character underlined by the
cursor. The right arrow is used to advance the cursor to the next character on the
right. When the cursor is advanced past the right most character, it wraps around to
the first character again. Formatting characters, such as the colon (:) in the time, the
decimal (.) in a concentration, and the slash (/) in date are skipped when advancing
the cursor.
Use the “arrow keys” to enter the correct time. The time is formatted as Hour:Minute.
2. Press the DONE soft key to confirm the time and move to the date option.
3. When setting the date, the DataFID prompts for the current date formatted as
Month/Day/Year. Use the ARROW KEYS to enter the correct date.
4. Press the DONE soft key to confirm the date and the display will return to the main
screen.
Date Format
The date format can be expressed either as MM/DD/YYYY, or as DD/MM/YYYY. Using either
the Up or Down arrow soft key, choose either option via the SELECT soft key.
Password
Sensitive options are those which can affect the DataFID ’s readings. These options are located
within the DataFID Setup menu. Whenever the DataFID Setup menu is selected, the DataFID
will prompt the user to enter a 4-digit password before accessing the functions.
The unit always has a password in force. When shipped from the factory, the code is 1111. To
change the DataFID password:
1. Use the DOWN ARROW soft key to point to PASSWORD, the press the SELECT
soft key.
2. User will be prompted to enter the current password. Using the UP, DOWN and
RIGHT ARROW soft keys, enter the new password. Press the DONE soft key when
finished.
NOTE: If the incorrect password is entered, the menu reverts back to DataFID Setup
and does not allow to go further into the DataFID Menu.
CAUTION: If the password is changed, please record the password setting. Once the
instrument is locked due to incorrect password, there is no way to unlock it without sending the
unit back to INFICON.
Units
The DataFID can display readings in two units of measure: PPM (parts per million) or PPB
(parts per billion). On selecting Units from the MENU, the two choices will appear as a list.
Using either the Up or Down arrow soft key, highlight the desired Units of Measure and use the
SELECT soft key to set the choice.