INFICON MicroFID II Portable Flame Ionization Detector - Manual (Page 8)

074-579-P1A 8
Notices and Warnings
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant
to Subpart B, Class B of Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the
interference at their expense.
MicroFID II Intrinsic Safety Notice
THE MicroFID II IS CLASSIFIED FOR USE IN CLASS I, DIVISION 1, GROUPS A, B, C, D HAZARDOUS
LOCATIONS. T4 (135°C) RATING.
The MicroFID II has been listed by Intertek, Inc., to comply with Underwriters Laboratories® Inc. UL® 913
Standard for Intrinsically Safe Apparatus and Associated Apparatus for use in Class I, Division 1, Groups
A, B, C, D Hazardous (Classified) Locations.
MicroFID II Safety Label
NOTE: The MicroFID II and MicroFID II are based on the same platform and contain the same
components. The terms may be used interchangeably throughout this manual.