INFICON MicroFID II Portable Flame Ionization Detector - Manual (Page 77)

074-579-P1A 77
Yearly Service Evaluation
INFICON advises that the MicroFID II be sent to INFICON Service once a year for preventive
maintenance and calibration. Sending the unit to INFICON on a yearly basis allows the user to
receive upgrades to software, preventive maintenance, cleaning and calibration, along with a
calibration certificate. Contact INFICON Customer Service for information on ProCare
TM Annual
Maintenance.
Maintenance Schedule Table
Item/Operation Frequency/Usage
Battery Pack Charging For 8 hours of use, charge 4 hours
Hydrogen Cylinder Filling 5 minutes for 10 hours of use (see Table 2
for cell charge times)
Inlet Filter Replacement When dirty or once per week
Sintered Filter Replacement Once every month in wet/concentrated
environments
Calibration - Daily In condition unit will be used
Calibration - Monthly Record readings. Send to INFICON
Service if inaccuracy consistently over
20%
Waste Electrical and Electronic Equipment (WEEE)
EU regulations for the disposal of electric and electronic appliances that have been defined in the EU
Directive 2002/96/EC and in national laws became effective in August 2005 and apply to this device.
Common household appliances can be disposed of using special collecting and recycling facilities.
However, as the MicroFID II has not been registered for household usage, it must not be disposed of
through those means. The device can be returned to your national vendor/sales organization for
disposal. Please do not hesitate to contact your vendor/sales organization if there are any questions on
this issue.