INFICON MicroFID II Portable Flame Ionization Detector - Manual (Page 54)

074-579-P1A 54
enter password
Clock
The Clock function is used to set both the current date and time.
Entering Numbers with the Soft Keys to Set the Clock
For all information entry in clock mode, the left, center and right soft keys correspond to the up,
down, and right arrow. See Figure 29. The up and down arrows are used to change the
character highlighted by the cursor. The right arrow is used to advance the cursor to the next
character on the right. To accept the changes, press the DONE soft key.
Figure 29. Setting the Time
To Set The Time And Date
1. From the MicroFID II Setup, use the Up or Down arrow soft key to select the Clock
option. Press the SELECT soft key. This allows you to edit the current time and to
edit the current date.
The up and down arrow soft keys are used to change the character underlined by the
cursor. The right arrow is used to advance the cursor to the next character on the
right. When the cursor is advanced past the right most character, it wraps around to
the first character again. Formatting characters, such as the colon (:) in the time, the
decimal (.) in a concentration, and the slash (/) in date are skipped when advancing
the cursor.
Use the “arrow keys” to enter the correct time. The time is formatted as Hour:Minute.
2. Press the DONE soft key to confirm the time and move to the date option.
3. When setting the date, the MicroFID II prompts you for the current date formatted as
Month/Day/Year. Use the ARROW KEYS to enter the correct date.
4. Press the DONE soft key to confirm the date and the display will return to the main
screen.
Enter current time
15:45
done