INFICON MicroFID II Portable Flame Ionization Detector - Manual (Page 55)

074-579-P1A 55
Date Format
The date format can be expressed either as MM/DD/YYYY, or as DD/MM/YYYY. Using either
the Up or Down arrow soft key, choose either option via the SELECT soft key.
Password
Sensitive options are those which can affect the MicroFID II ’s readings. These options are
located within the MicroFID II Setup menu. Whenever the MicroFID II Setup menu is selected,
the MicroFID II will prompt you to enter a 4-digit password before you can access the functions.
The unit always has a password in force. When shipped from the factory, the code is 1111. To
change the MicroFID II password:
1. Use the DOWN ARROW soft key to point to PASSWORD, the press the SELECT
soft key.
2. You will be prompted with the current password. Using the UP, DOWN and RIGHT
ARROW soft keys, enter the new password. Press the DONE soft key when finished.
NOTE: If the incorrect password is entered, the menu reverts back to MicroFID II Setup
and does not allow you to go further into the MicroFID II Menu.
CAUTION: If you change the password, make sure you record the setting. If you cannot
remember your password once the instrument is locked, there is no way to unlock it without
sending the unit back to INFICON.
Language – This feature is not available.
Units
The MicroFID II can display readings in two units of measure: PPM (parts per million) or PPB
(parts per billion). On selecting Units from the MENU, the two choices will appear as a list.
Using either the Up or Down arrow soft key, highlight the desired Units of Measure and use the
SELECT soft key to set the choice.
Real Time Data
When the MicroFID II is being used in conjunction with a Computer or a PDA, the current TVOC
reading can be sent to a PDA only if the Real Time Data option is ON. The Real Time Data
function is used to switch on and off the Bluetooth message transmission. To switch the
Bluetooth messaging to the PDA on and off:
1. From the Main Menu display, select the “MicroFID II Setup” option.
2. Select the Real Time Data option and then press the SELECT soft key. Press the
DOWN ARROW soft key to either turn the Bluetooth messaging to the
Computer/PDA on or off.
3. Press SELECT soft key to return to the MicroFID II Setup menu display.