INFICON MicroFID II Portable Flame Ionization Detector - Manual (Page 41)

074-579-P1A 41
main menu
Keys
Fixed ON/OFF Key
The ON/OFF key is used to both power on to the MicroFID II and to power off the MicroFID II.
To turn on the MicroFID II, press the ON/OFF key. To turn off the power, press the ON/OFF
key. It is recommended that the Shutdown MicroFID II option in the Main Menu be used to
ensure proper shutdown before pressing the OFF key.
Soft Keys
Three soft keys are located directly below the display. Each of these soft keys has varying
functions for configuring the MicroFID II, editing the data, and controlling the display. Since only
three soft keys are available, each function is broken down into a path. Maps, showing each
path and the resulting functions, are shown in Figures 13, 14, 15, and 16.
Beginning Operation
Turning on the MicroFID II
1. Turn the MicroFID II on by pressing the ON/OFF key. See Figure 5 for the location of
the ON/OFF key.
2. The MicroFID II will display the instrument’s software version number. Next, the
MicroFID II will proceed to the Main menu display.
3. For maximum accuracy and stability, allow the MicroFID II to warm-up for 20 minutes
prior to calibration.
Default Display
The MicroFID II always starts in the Main menu after start up. The unit’s setup will be restored to
the previous entries at the time it was powered down. The Up and Down arrows (soft key 1 and
3) provide a way for the user to choose from the 4 main options: (MicroFID II Setup, Data Log
Options, Shutdown MicroFID II, and View Menu). The Measure function (soft key 2) provides a
way for the user to start or return to TVOC measuring mode.
Figure 17. Main Menu Display
View Menu
MicroFID II
Setup
Data Log Options
Shutdown MicroFID II
meas
select