INFICON MicroFID II Portable Flame Ionization Detector - Manual (Page 11)

074-579-P1A 11
DECLARATION OF CONFORMITY
This is to certify that this equipment, designed and manufactured by:
INFICON Inc.
Two Technology Place
East Syracuse, NY 13057
USA
meets the essential safety requirements of the European Union and is placed on the market accordingly.
It has been constructed in accordance with good engineering practice in safety matters in force in the
Community and does not endanger the safety of persons, domestic animals or property when properly
installed and maintained and used in applications for which it was made.
In addition, this is to certify that this equipment has also been designed and manufactured, having regard
to the state of the art, to ensure compliance with the Protection Requirements of EMC directive
2004/108/EC.
A Technical Documentation File is also available for review by competent authorities and will be
maintained for a period of ten years after the date on which the equipment was last manufactured. In
addition to this file, technical, installation, maintenance and application information concerning this
equipment can also be found in the Operating Manual(s) for this product or product family.
Equipment Description:
MicroFID II, MicroFID II, SiteFID.
Applicable Directives: 2006/95/EC (LVD)
1999/5/EC (R&TTE / EMC)
2004/108/EC (General EMC)
2011/65/EC (RoHS)
Applicable Standards:
Safety: UL 913, Fifth Edition; Dated February 21, 1997; with Revisions through
and including February 24, 1997, UL Standard for Safety for Intrinsically
Safe Apparatus and Associated Apparatus for Use in Class I, II, and III,
Division 1, Hazardous (Classified) Locations
ANSI/UL 1203-2006; Fourth Edition; Dated September 15, 2006,
UL Standard for Safety for Explosion-Proof and Dust-Ignition-Proof
Electrical Equipment for Use in Hazardous (Classified) Locations
ANSI/UL 61010-1-2008; Second Edition; Dated July 12, 2004,
(UL Standard for Safety for Electrical Equipment for Measurement,
Control and Laboratory Use)
Emissions: EN 61326-1:2006: FCC 47 CFR Part 15 Subpart B
(Radiated & Conducted Emissions)
Class B: Emissions per Table 3
(EMC – Measurement, Control & Laboratory Equipment)