Replacing fuses, 2 replacing fuses – Heidolph Rotacool Mini User Manual
Page 36
Maintenance, cleaning, service
34
Rotacool mini
1.01
7.2 Replacing fuses
The fuse is located on the rear of the device.
Fig. 7-1:
Fuse on rear of device
8 Mains connection with fuse carrier
Accidental switching on the circulating chiller!
Splashing of cooling liquid due to disconnected cooling liquid hoses.
Ensure that the mains switch is switched off.
1. Disconnect the device from its mains socket.
2. Remove fuse cover.
3. Use an appropriate new fuse and refit fuse cover
The fuse is now replaced. The device can now be returned to its original state.
CAUTION
See also other documents in the category Heidolph Equipment:
- Hei-VAP Precision (59 pages)
- Hei-VAP Value (84 pages)
- Rotacool (15 pages)
- RotaChill (37 pages)
- ROTAVAC valve control (188 pages)
- ROTAVAC valve control (174 pages)
- ROTAVAC vario control (34 pages)
- ROTAVAC Vario pumping unit (61 pages)
- LABOROTA 4000 eco (168 pages)
- LABOROTA 4000 up to 4003 (364 pages)
- Heating bath HB 4000 (52 pages)
- LABOROTA 20 eco (180 pages)
- LABOROTA 20 compact and safety (284 pages)
- LABOROTA 20 automatic (190 pages)
- ROTAVAC 20 (35 pages)
- Automatic Module Distimatic (52 pages)
- Synthesis 1 (268 pages)
- MR Hei-Standard (39 pages)
- MR Hei-End (124 pages)
- MR Hei-Mix L (24 pages)
- MR Hei-Mix S (34 pages)
- EKT Hei-Con (78 pages)
- Heat-On (13 pages)
- StarFish Multi-Experiment Work Station (17 pages)
- RZR 1 (44 pages)
- RZR 2020 (58 pages)
- RZR 2051 control (68 pages)
- REAX top (44 pages)
- REAX 2 (48 pages)
- REAX 20 (54 pages)
- Multi Reax (60 pages)
- TITRAMAX 100 / 101 / 1000 (60 pages)
- UNIMAX 1010 (68 pages)
- UNIMAX 2010 (72 pages)
- Incubator 1000 (64 pages)
- Pump drives (198 pages)
- SilentCrusher M (146 pages)
- SilentCrusher S (98 pages)