Heidolph Rotacool Mini - Manual (Page 33)

Setup and initial use
1.01 Rotacool mini 31
Fig. 5-3: Rotacool mini Filling
2 Fill level indicator; overflow hose; drain hose
4 Minimum filling level
5.4.4 Connecting the instrument
AC voltage and rated AC voltage printed on identification plate do not
match!
Damage due to overvoltage.
 Ensure that your local AC voltage corresponds to that stated on the identi-
fication plate.
Accidental switching on!
Cooling liquid may splash if hoses have not been connected or if they leak.
 Ensure that the mains switch is switched off.
By default the instrument intended for use with 230/240 V is equipped with a
EURO plug (DIN 49441 CEE 7/VII 10/ 16 A 250 V), while those intended for
120 V have standard US plugs (NEMA Pub. No. WDI.1961 ASA C 73.1. 1961,
p. 8, 15 A 125 V).
CAUTION
CAUTION