EZWatch Pro 1.1u User Manual

Page 20

EZWatch Pro

Enable standard recording: Starts standard mode video recording.

Stop recording: Disables standard recording feature, and save the resulting video
clip.
Snapshot: Captures a single frame and displays it. It can be saved in BMP or JPEG
format.

2. Video window:
Arrange video window: When clicking this button, the video windows will be equally sized
automatically.
Zoom-in video: This button is designed to amplify the video display image. After pressing the button,
the icon
will show up for you to increase the size of the display window. Select the video window
that
you would like to zoom in, and then just click the left button of the mouse twice. This
window
will be magnified on the monitor.
Zoom-out video: This button is designed to shrink the video display image. After pressing the button,
the icon
will show up for you to decrease the size of the display window. Select the video
window that
you would like to zoom out, and then just click the left button of the mouse twice. This
window
will be reduced on the monitor.
Clear zoom: This button is designed to recover the video display image. After pressing the button, the
icon will
show up for you to recover the size of the display window. Select the video window that
you would
like to recover, and then just click the left button of the mouse twice. This window will go to
the
original video size.
Change video window: This button is designed to change the resolution of the video window. After
pressing the
button, the icon will show up for you to change the resolution of the display
window.
Available resolutions are 160x120, 176x144, 320x240, 352x288 and 640x480
pixels.
Adjust image settings: Sets the levels for brightness, contrast, saturation and hue of the video
cameras.

3. Video clips:

Motion clips:

Executes the current motion detected video directly. If you press the button, the screen

will display the number of the camera for you to select the video file from the camera list.
Before you can play a recorded video, you need to select the camera name and recording
period that you want to playback. Sequence clips : Please refer to the tool bar description.