ETC Net3 Two Port DMX Gateway - Manual (Page 11)

7
Mechanical
• Fits in standard 2-gang masonry deep back box
• Fabricated of 16-gauge steel, finished in fine-texture, scratch-resistant, black powder
coat
• 4.875” x 5.00” x 1.90” / 124mm x 127mm x 48.2mm (W x H x D of gateway protruding
out of a back box / enclosure)
• Hanging Bracket for portable version allows mounting in many orientations (U-bolt
option)
• Single UTP Ethernet jack on rear PCB of unit
• Backlit graphic LCD display for identification (soft-labeling) and status reporting:
• Gateway identification (User-defined name, software version)
• Network configuration (including IP address information)
• DMX port configuration
• DMX port status
• Menu Button for backlight/paging control
• Configuration done using Network Configuration Editor (NCE)
• Power (blue) and Network present/activity (green) LED indicators on the front
• Reset button for hard reset, forced reboot
Electrical
• Power consumption: 3.3 watts normal operation / 5 watt maximum.
• Power Supply options include:
• 8 to 28Vdc external power
• 48V IEEE 802.3af power over Ethernet (PoE)
• Optional Universal Power Supply available (ETC Part# PS313-F)
90-240VAC to 12Vdc @ 1.3A