DATOptic RM12-S6.TB - Rackmount - Manual (Page 67)

APPENDIX
176
SNMP Community Configurations
About community, Community name acts as a password to
screen accesses to the SNMP agent of a particular network
device. Type in the community names of the SNMP agent.
Before access is granted to a request station, this station must
incorporate a valid community name into its request; otherwise,
the SNMP agent will deny access to the system. Most network
devices use “public” as default of their community names. This
value is case-sensitive.
SNMP Trap Notification Configurations
The "Community Name" should be the same as firmware-
embedded SNMP Community. The "SNMP Trap Notification
Configurations" includes level 1: Serious, level 2: Error, level 3:
Warning and level 4: Information. The level 4 covers notification
events such as initialization of the controller and initiation of the
rebuilding process; Level 3 includes events which require the
issuance of warning messages; Level 2 covers notification events
which once have happen; Level 1 is the highest level, and covers
events the need immediate attention (and action) from the
administrator.
C-3-4-2 Linux
You must have administrative level permission to install Areca
RAID software. This procedure assumes that the Areca RAID
hardware and Linux are installed and operational in your sys-
tem. The old version agent has to modify the open source
project, integrate the changes from Areca manually, then take
the modified binaries and manually deploy them. Users need to
change source code from the linux distribution and then main-
tain it by themselves.