DATOptic RM12-S6.TB - Rackmount - Manual (Page 19)

WEB BROWSER-BASED CONFIGURATION
128
• Volume Name
The default volume name will always appear as “ARC-12x4-VOL”.
You can rename the volume set providing it does not exceed the
15 characters limit.
• Volume Raid Level
Set the Raid Level for the volume set. Highlight the desired
RAID level from the available RAID levels option.
• Capacity
The maximum volume size is the default initial setting. Enter the
appropriate volume size to fit your application.
• Greater Two TB Volume Support
If volume capacity will exceed 2TB, controller will show the
"Greater Two TB Volume Support" sub-menu. Greater Two TB
Volume Support option: "No", "64bit LBA" and "4K Block".
- No
It keeps the volume size with max. 2TB limitation.
- 64bit LBA
This option uses 16 bytes CDB instead of 10 bytes. The
maximum volume capacity is up to 512TB.
This option works on different OS which supports 16 bytes CDB.
Such as:
Windows 2003 with SP1 or later
Linux kernel 2.6.x or later