DATOptic RM12-S6.TB - Rackmount - Manual (Page 22)

131
WEB BROWSER-BASED CONFIGURATION
SCSI LUN: Each SCSI ID can support up to 8 LUNs. Most 6Gb/s
SATA controllers treat each LUN like a SATA disk.
6.6.2 Create Raid30/50/60 (Volume Set
30/50/60)
To create 30/50/60 volume set from RAID set group, move
the cursor bar to the main menu and click on the “Create
Raid30/50/60” link. The “Select The Raid Set To Create Volume
On It” screen will show all RAID set number. Tick on the RAID set
numbers (same disk No per RAID set) that you want to create
and then click on the “Submit” button.
The new create volume set attribute allows user to select the Vol-
ume Name, Raid Level, Capacity, Greater Two TB Volume Support,
Initialization Mode, Strip Size, Cache Mode, Tagged Command
Queuing, and SCSI Channel/SCSI ID/SCSI Lun. Please refer to
above section for details description of each item.
Note:
RAID level 30 50 and 60 can support up to eight RAID set
(four pairs), but it can not support expansion and migration.
6.6.3 Delete Volume Set
To delete a volume from RAID set, move the cursor bar to the
main menu and click on the “Delete Volume Set” link. The “Select
The Raid Set To Delete” screen will show all RAID set numbers.
Click a RAID set number and the “Confirm The Operation” check
box and then click the “Submit” button to show all volume set