DATOptic RM12-S6.TB - Rackmount - Manual (Page 10)

119
WEB BROWSER-BASED CONFIGURATION
To configure RAID controller on a remote machine, you need to
know its IP address. The IP address will default show in McBIOS
RAID manager of “Ethernet Configuration” or “System Informa-
tion” option. Launch your firmware-embedded TCP/IP & web
browser-based McRAID storage manager by entering http://[IP
Address] in the web browser.
6.2 McRAID Storage Manager
The McRAID storage manager initial start-up screen displays the
current configuration of your 6Gb/s SATA RAID controller. It dis-
plays the “Raid Set List”, “Volume Set List”, and “Physical Disk List”.
The RAID set information, volume set information, and drive infor-
mation can also be viewed by clicking on the “RAID Set Hierarchy”
screen. The current configuration can also be viewed by clicking on
“RAID Set Hierarchy” in the main menu.
Note:
You can find controller Ethernet port IP address in McBIOS
RAID manager “System Information” option.
To display RAID set information, move the mouse cursor to the de-
sired RAID set number, then click it. The RAID set information will
be displayed. To display volume set information, move the mouse
cursor to the desired volume set number, then click it. The vol-
ume set information will be displayed. To display drive information,
move the mouse cursor to the desired physical drive number, then
click it. The drive information will be displayed.