Appendix – DATOptic RM12-S6.TB - Rackmount User Manual
Page 53
APPENDIX
162
Parameter:
Fn: Firmware Updating.
Ex: Update Firmware And File Path Is In [C:\FW\ARC12x4FIRM.BIN.]
Command: sys updatefw path=c:\fw\arc12x4firm.bin [Enter]
A-4 Upgrading Firmware Through CLI
This Command Line Interface (CLI) provides you to configure and
manage the 6Gb/s SATA RAID controller components in Windows,
Linux, FreeBSD and more environments. The CLI is useful in en-
vironments where a graphical user interface (GUI) is not avail-
able. Through the CLI, you perform firmware upgrade that you can
perform with the McRAID storage manager GUI. The controller has
added protocol on the firmware for user to update the controller
firmware package (BIOS, BOOT, FIRM and MBR0) through the util-
ity.
To update the controller firmware, follow the procedure below:
A:\nflash
Raid Controller Flash Utility
V1.11 2007-11-8
Command Usage:
NFLASH FileName
NFLASH FileName /cn --> n=0,1,2,3 write binary to controller#0
FileName May Be ARC12x4FIRM.BIN or ARC12x4*
For ARC12x4* Will Expand To ARC12x4BOOT /FIRM/BIOS.BIN
A:\>nflash arc12x~1.bin
Raid Controller Flash Utility
V1.11 2007-11-8
MODEL : ARC-12x4
MEM FE620000 FE7FF000
File ARC12x~1.BIN : >>*** => Flash 0K