DATOptic RM12-S6.TB - Rackmount - Manual (Page 43)

WEB BROWSER-BASED CONFIGURATION
152
puters and eliminate the possibilities of administrative errors
and duplicate addresses. To manually configure the IP address
of the controller, move the cursor bar to Local IP address item,
then reassign the static IP address of the controller.
• Gateway IP address
A gateway is a node (a router) on a TCP/IP network that serves
as an access point to another network. A default gateway is the
node on the computer network that the network software uses
when an IP address does not match any other routes in the
routing table.
• Subnet Mask
A Subnet mask is a 32-bit number that masks an IP address,
and divides the IP address into network address and host ad-
dress.
• HTTP Port Number
To manually configure the “HTTP Port Number” of the controller,
move the cursor bar to “HTTP Port Number” item, then reassign
the default “HTTP Port Number” of the controller.
• Telnet Port Number
To manually configure the “Telnet Port Number” of the controller,
move the cursor bar to “Telnet Port Number” item, then reassign
the default “Telnet Port Number” of the controller.
• SMTP Port Number
To manually configure the “SMTP Port Number” of the controller,
Move the cursor bar to “SMTP Port Number” item, then reassign
the default “SMTP Port Number” of the controller.
6.8.5 Alert By Mail Configuration
To configure the 6Gb/s SATA RAID controller e-mail function,
move the cursor bar to the main menu and click on the “System
Controls” link. The “System Controls” menu will show all items.
Move the cursor bar to the “Alert By Mail Configuration” item,
then select the desired function. This function can only be set via
web-based configuration.