DATOptic RM12-S6.TB - Rackmount - Manual (Page 47)

WEB BROWSER-BASED CONFIGURATION
156
6.8.11 Modify Password
To set or change the 6Gb/s SATA RAID controller password, select
“System Controls” from the menu and click on the “Modify Pass-
word” link. The “Modify System Password” screen appears.
The manufacture default password is set to 0000.
The password option allows user to set or clear the 6Gb/s SATA
RAID controller’s password protection feature. Once the password
has been set, the user can only monitor and configure the 6Gb/s
SATA RAID controller by providing the correct password. The
password is used to protect the 6Gb/s SATA RAID controller from
unauthorized entry. The controller will check the password only
when entering the main menu from the initial screen. The 6Gb/s
SATA RAID controller will automatically go back to the initial
screen when it does not receive any command in 5 minutes. Do
not use spaces when you enter the password, If spaces are used,
it will lock out the user.
To disable the password, leave the fields blank. Once the user
confirms the operation and clicks the “Submit” button, the exist-
ing password will be cleared. Then, no password checking will oc-
cur when entering the main menu from the starting screen.