Appendix – DATOptic RM12-S6.TB - Rackmount User Manual
Page 62
171
APPENDIX
When you open the “SNMP Configuration” link, you will see the
following settings:
(1).
SNMP Trap Configurations
Enter the SNMP Trap IP Address.
(2). SNMP System Configurations
Community name acts as a password to screen accesses to the
SNMP agent of a particular network device. Type in the com-
munity names of the SNMP agent. Before access is granted to a
request station, this station must incorporate a valid community
name into its request; otherwise, the SNMP agent will deny ac-
cess to the system. Most network devices use “public” as default
of their community names. This value is case-sensitive. The
system Contact, Name and Location that will be shown on the
outgoing SNMP trap.
(3).
SNMP Trap Notification Configurations
Please refer to
Appendix D
“Event Notification Configurations”.
Note:
After you confirm and submit configurations, you can use
"Generate Test Event" feature to make sure these settings
are correct.