DATOptic RM12-S6.TB - Rackmount - Manual (Page 4)

113
ARCHTTP PROXY SERVER INSTALLATION
(3). Event Notification Configurations:
MailTo Name: Enter the alert receiver name that will be shown on
the outgoing mail.
Mail Address: Enter the alert receiver mail address.
Ex: [email protected].
According to your requirement, set the corresponding event level :
Disable Event Notification: No event notification will be sent.
Urgent Error Notification: Send only urgent events.
Serious Error Notification: Send urgent and serious events.
Warning Error Notification: Send urgent, serious and warning
events.
Information Notification: Send all events.
Notification For No Event: Notify user if no event occurs within 24
hours.
• SNMP Traps Configuration:
To enable the RAID controller to send the SNMP traps to client
SNMP manager using the IP address assigned to the operating
system, such as Net-SNMP manager, you can simply use the SNMP
function on the ArcHttp proxy server software. To enable the
RAID controller SNMP traps sending function, click on the “SNMP
Configuration” link. The Archttp proxy only provide one direction
to send the trap to the SNMP manager without needing to install
the SNMP extension agent on the host. If SNMP manager requests
to query the SNMP information from RAID controller, please refer
the Appendix C "SNMP Operation & Installation". The “SNMP traps
Configuration” menu will be shown as following: