beautypg.com

Operating manual – BAND-IT Shield-Lok Clamp User Manual

Page 4

background image

SL4099 Shield-Lok™

Shield-Lok™ Tool Pack

Clamp

www.BAND-IT-IDEX.com

Document # P07687 Rev. E

© Copyright

BAND-IT-IDEX, Inc. 2012

All rights reserved

Page 4

BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925

Operating Manual

Safety Guidelines and Warranty

Read this manual to help you understand the intent and operation of this tool prior to the
installation of Shield-Lok™ clamps.

o

This product manual contains detailed instructions for setting-up the tool and safely
installing BAND-IT

Shield-Lok™

clamps.

o

Always wear safety glasses and appropriate gloves when operating this tool.

o

Keep hands away from moving parts while installing clamps.

o

Care should be taken to ensure fingers are not in the way of the clamp being applied.

o

Always remove battery before performing maintenance.

IMPORTANT:

o

The object clamped and the ½”

Shield-Lok™

clamp must be compatible with each other

and with the environment in which the final product will be used.

The SL4000 tool is designed for use with BAND-IT ½”

Shield-Lok™

clamps only. Accordingly,

BAND–IT– IDEX, Inc. makes no representations with respect to the compatibility of these tools
when used with non-BAND-IT clamps.

Warranty:
For warranty information, or to view up-to-date literature and manuals go online at:

www.band-it-idex.com

This manual is related to the following products: