BAND-IT IT1000-AB 1/4 Tie-Lok Tool - Manual (Page 22)

Document # I17791 Rev H
© Copyright
BAND-IT-IDEX, Inc. 2009
All rights reserved
www.BAND-IT-IDEX.com
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street Denver, CO 80216-0307 USA
P: 1-800-525-0758 F: 1-800-624-3925
22 of 38
IT1000-AB
1/4” Tie-Lok ® Tool
Production tools will experience wear of specific parts. Preventative maintenance, including
regular cleaning and lubrication, will reduce the replacement frequency of these parts. To
maximize life, use synthetic gel lubricant containing Teflon. See (pages 22-28) for tool
maintenance. When repairing tools, threaded fasteners should be secured using a small
amount of Loctite, Blue - Medium strength being careful to apply sparingly.
Part #
*Replacement Parts
Description
Quantity per
Tool
I10688 Knife 1
I13887 Knife Pin 1
I13687 Knife Pin Access Screw 3
I10788 Blade 1
I13987 Blade Pin 1
I10188 Tension Block 1
I10190 Tension Block Assembly (Includes I10188,
I10388, I10888, and 2 x A38487) 1
I24199 Flip Cover Assembly (Includes assembled flip
cover and 2 quick release pins) 1
I16387 Lubricant (synthetic gel lubricant containing
Teflon)
*Note
– A basic IT1000 Repair Parts Kit is now available.
Please have tool model and serial #’s available when calling the factory for service
assistance. Contact BAND-IT-IDEX customer service, 800-525-0758.
Part numbers are subject to change.
Maintenance