BAND-IT IT1000-AB 1/4 Tie-Lok Tool - Manual (Page 21)

Document # I17791 Rev H
© Copyright
BAND-IT-IDEX, Inc. 2009
All rights reserved
www.BAND-IT-IDEX.com
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street Denver, CO 80216-0307 USA
P: 1-800-525-0758 F: 1-800-624-3925
21 of 38
IT1000-AB
1/4” Tie-Lok ® Tool
Replace Gripper Front Gripper
Replace Assembly Tension Block Assembly
Clean & Re-Lubricate Front Gripper
Rotate Cut-off Blade
Clean & Re-Lubricate Tool Head
Clean & Re-Lubricate Flip Cover
Clean & Re-Lubricate Tension Block Assembly Every 12,500
Maintenance
Action
Maintenance
Item
Clamps
Installed
Replace Blade, Blade pin, Knife
and Knife pin
Every 50,000
Rotate Cut-off Knife
Clean & Re-Lubricate Mechanical Linkage Every 25,000
Preventative Maintenance Schedule
Tool Preventative Maintenance:
The tool has some wear components that must be checked and replaced on a certain
schedule. BAND-IT has developed a Preventative Maintenance (PM) schedule to help
facilitate these requirements. If tools are experiencing difficulties during function or there
audible air leaks coming from inside the handle, the tool should be returned to BAND-IT-
IDEX, Inc. for servicing.
BAND-IT recommends that the tool be sent in for general overhaul every 100,000 clamps
installed.
Maintenance