Atop Technology SW550X User manual User Manual

Page 96

Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1

Fig. 5. 8

The left hand side of the Control Panel shows the list of selected Virtual COM ports. Click on

Select Ports to add or remove Virtual COM ports from the list. The right hand side of the

Control Panel shows the configurations of the selected Virtual COM port marked in blue. Each

Virtual COM port can have its own settings.

Note: The changes to Virtual COM ports apply immediately, so there is no need to save the settings manually.

However, if the Virtual COM port is already in use, it is necessary to close the Virtual COM port and open it after the

TCP connection closes completely in order for the changes to take effect.