7 tcp server application: enable reverse telnet, Tcp server application: enable reverse telnet – Atop Technology SW550X User manual User Manual
Page 77

Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
71
4.2.7 TCP Server Application: Enable Reverse Telnet
Reverse Telnet is useful if a telnet program is used to connect to SW550X and the serial
interface of the SW550X is connected to a Terminal Server. Telnet programs in Windows/Linux
require special handshaking to get the outputs and formatting show properly. SW550X will
interact with those special commands (CR/LF commands) if Reverse Telnet is enabled.
Fig. 4. 15
Follow
Sec. 4.1.1
to configure SW550X in TCP Server mode properly.
Click on the dropdown box of the Application
option and switch to “Reverse Telnet”
to enabled telnet application in SW550X.
Scroll to the bot
tom of the page and click on “Save & Apply” button to save the
changes.