Atop Technology SW550X User manual - Manual (Page 39)

Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
33
3.7.1 Advanced Settings
Provides details on wireless network parameters for performance tuning. Changes in this
section may affect overall performance, so caution is recommended, if you are not clear of
what you are doing please refrain from altering them, Fig. 3. 14.
Fig. 3. 14
 Radio Off – When enabled, this allows the user to turn off the wireless completely.
 Fast Handoff – Atop’s proprietary protocol to speed up roaming between AW5500s in
addition to Fast Roaming. Enable to allow AW5500 to share its neighboring AW5500
information to SW550X to further reduce its roaming time.
 Fast Roaming – Enable to allow SW550X to scan for available Access Points in the
background to speed up roaming when necessary.
 Roaming Threshold – Determine when SW550X should try to connect to another
Access Point when the wireless signal falls below the selected range.
 Tx Power – is the SW550X’s Transmission Power; the transmission power can be
reduced to prevent wireless interference to other wireless networks.
 STP – The Spanning Tree Protocol is only available in the AP Client mode. Enable this
option if STP is enabled in your network to prevent network loops by setting up the
Forward Delay time. When disabled, SW550X will not forward STP BPDUs.