12 system setup, 1 date/time settings, System setup – Atop Technology SW550X User manual User Manual
Page 52: Date/time settings, Attention

Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
46
3.12 System Setup
3.12.1 Date/Time Settings
Date and time can be set manually, or using Network Time Protocol (NTP) to automatically
synchronizes with a Time Server. For auto-synching check the box below NTP Server
Settings
“Obtain date/time automatically” proceeding then to fill the IP address or host
name for it. If a hostname is entered, the DNS server must be configured properly; a Time
Zone can be selected as well, Fig. 3. 24.
Fig. 3. 24
Attention
It is also important to setup Default Gateway and DNS Servers in the Network
Settings properly, so your SW550X can lookup DNS names and route the mails to
the proper default gateway.