2 running serial/ip in windows, Running serial/ip in windows – Atop Technology SW550X User manual User Manual
Page 94

Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
88
5.2.2 Running Serial/IP in Windows
Find Serial/IP Control Panel from:
Start
→ All Programs → Serial/IP → Control Panel
In the Windows Control Panel, open the Serial/IP applet.
In the Windows notification area, Fig. 5. 6; right click in the Serial/IP tray icon and
click on Configure to open the Control Panel.
Fig. 5. 6
If no Virtual COM port is selected, a dialog will pop up and asks to select at least one port as
the Virtual COM port before proceeding, Fig. 5. 7.