Atop Technology SW550X User manual - Manual (Page 45)

Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
39
3.9 SNMP/ALERT Settings
The SNMP is used by network management software to monitor devices in a network to
retrieve network status information and to configure network parameters. The SNMP Settings
shows the configuration of this device so it can be viewed by third-party SNMP software as
shown below, Fig. 3. 18.
Fig. 3. 18
SW550X provides three SNMP fields, which are “System Contact”, usually used to specify