2 operation mode, Operation mode – Atop Technology SW550X User manual User Manual
Page 24

Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
18
3.2 Operation Mode
This is the welcome screen for the SW550X Series. There are two operation modes to choose
from: Wireless Client and AP Client. In Wireless Client mode, SW550X will have two
independent network interfaces, LAN and WLAN. Each interface would have its own IP
address; hence traffics from the LAN interface would not be bypassed to the WLAN interface,
and vice versa. In the AP Client mode, the LAN and WLAN interfaces would bridge together
to create one single Bridge interface using one IP address. Traffic from either side of the
network would be passed onto the other side of the network.