AirLive WHA-5500CPE - Manual (Page 96)

6. Command Line Interface
89 AirLive WHA-5500CPE User’s Manual
„
set client isolation
‰ Purpose: Enable or Disable client isolation / privacy seperator
‰ Example:
Command> set client isolation disable
Set client isolation disable successful!
„
set operation mode
wds_bridge | wisp | router>
‰ Purpose: set or change operation mode
‰ Example:
Command> set operation mode AP
Operation mode is already setting!
Command> set operation mode wds_bridge
System should be reboot...
Are you sure ? ( y/n ) : y
„
set
‰ Purpose: enable/disable ping response or web server on the lan/wan side
‰ Example:
Command> set lan ping enable
set lan ping already enable
„
set lan ip sm gw dns
‰ Purpose: set LAN IP address such as IP, Subnet mask, gateway, and DNS
server
‰ Example:
Command> set lan ip 192.168.1.1 sm 255.255.255.0 gw 192.168.1.254 dns
168.95.1.1
killall: dnsmasq: no process killed
LAN IP address : 192.168.1.1
Netmask : 255.255.255.0
Gateway : 192.168.1.254