AirLive WHA-5500CPE - Manual (Page 66)

4. Web Management-Wireless and WAN Settings
59 AirLive WHA-5500CPE User’s Manual
4.4 Router Mode Settings
Operation Mode -> Setup
This section will explain WAN port settings and other functions that are available only in
WISP router and AP Router mode.
4.4.1 WISP Router Mode
The WISP Router mode is also known as Client Router. The wireless side is connected to
the remote AP as in Client Infrastructure mode. Between the wireless and LAN is the IP
sharing router function. This is used to share WISP connection. The WAN is on the
wireless side.
4.4.2 AP Router Mode
In AP Router mode, the POE port of the WHA-5500CPE will turn into the WAN port. The
wireless interface will become the LAN side. It will turn WHA-5500CPE into a wireless
router. Since the Ethernet interface becomes WAN; if your PC is connected to the POE
port, the management IP will change to the WAN IP (192.168.2.1). The remote
management will be automatically turned on to allow you managing the device from the
POE WAN port.
WAN
LAN
WAN
LAN