AirLive WHA-5500CPE User Manual

Page 68

4. Web Management-Wireless and WAN Settings

AirLive WHA-5500CPE User’s Manual

Clone MAC Address: Some service provider (Cable Modem provider) lock to

certain MAC address. In this situation, the WAN port of WHA-5500CPE need to
clone the MAC address. Please check the “Clone MAC address” box and enter
the address that need to be cloned.

4.4.4 Dynamic DNS Settings

Operation Mode -> Setup -> Dynamic DNS Settings

Dynamic DNS (DDNS) allows you to create a hostname that points to your dynamic IP or

static IP address or URL. WHA-5500CPE provide Dynamic DNS client using DynDNS,

please visit

http://www.dyndns.org

for detail.

4.4.5 Remote Management Settings

Operation Mode -> Setup -> Remote Management

Remote Management allows administrator to manage the WHA-5500CPE from WAN side.
You can also change the management port and other settings here.

HTTP Port No: The default port for HTTP is Port 80, you can change the value here
Timeout: The default management timeout is 10 minutes. After timeout, the

WHA-5500CPE will ask you to login again. You can change the timeout value here.