AirLive WHA-5500CPE - Manual (Page 91)

6. Command Line Interface
AirLive WHA-5500CPE User’s Manual 84
hello 00-4f-62-24-12-34
„
show radius server
‰ Purpose: Show radius server settings
‰ Example:
Command> show radius server
RADIUS Server State IP/Port
----------------------------------------------------------------------------------------
Primary Disabled 0.0.0.0/1812
Secondary Disabled 0.0.0.0/1812
RADIUS Server reattempt: 60 seconds
„
show radius server
‰ Purpose: Show settings of primary or secondary radius server
‰ Example:
Command> show radius server primary
RADIUS Server: primary
State: Disabled
Server IP: 0.0.0.0
Port Number: 1812
Shared Secret:
„
show log level
‰ Purpose: show log level
‰ Example:
Command> show log level
Log level is 8
„
show telnet / system
‰ Purpose: show telnet management information and system status
‰ Example:
Command> show telnet
Telnet session timeout: 0 minutes
Telnet port number: 23
Telnet state: enable